GreenFire Wetting Agent


Product Sizes

– 275 Gallon Tote
– 55 Gallon Drum
– 5 Gallon Tote

*Shipping not included

Product Overview

Tested under NFPA 18 Wetting Agent guidelines per the UL 711 standard, GreenFire Wetting Agent has been proven to extinguish Class A and B fires in inner city settings and more. Contains no PFOS, PFOA, nor any family of toxic PFAS chemicals.

  • Class A-B
  • Effective on D, K, Li-Ion (pending)
  • Pumper Fitting Safe
  • Non-Clogging
  • Non-Corrosive to Induction Pumps
  • Non-Toxic
  • Non-Carcinogenic
  • Does not contain PFAS or Forever Chemicals
  • USDA Recognized
  • Food environment Safe
  • Easy Cleanup

Firefighting Industries

  • Urban-Interface (WUI)
  • Wildland
  • Inner City
  • Residential
  • Commercial
  • Industrial
  • Utilities
SKU: GFWA Categories: ,


GreenFire Wetting Agent is a class A-B fire protection product that is Fluorine and PFAS Free, non-toxic, and non-carcinogenic. No additional equipment, nozzles, or hoses needed.

See more about GreenFire

Download Product Information Sheets

Product Information & Technical Data


GreenFire Wetting Agent is Class A-B

D, K, Li-Ion Pending

Firefighting Applications

GreenFire Wetting Agent can be used for:

    • Paper
    • Wood
    • Trash
    • Petroleum or Alcohol-based fires
    • Aircraft hangars
    • Fuel storage
    • Mechanical bays
    • Equipment
    • Any other materials or structures that could be at risk to fire


  • PFAS Free
  • Zero Haz-Mat clean up required
  • Does not contaminate waterways
  • Non-Carcinogenic
  • Non-Toxic
  • Zero VOC
  • Zero Forever Chemicals
  • NSF White Book Listed
  • Food environment safe
  • USDA Recognized


No special protective equipment, precautions, hazards, or extinguishing media is needed when using GreenFire Wetting Agent.


Hazards – GreenFire Wetting Agent is:

  • Non-flammable
  • Non-combustible
  • Non-explosive
  • Intrinsically flame retardant
  • Non-Carcinogenic
  • Non-Toxic

Recommended Application Rates

  • CAFS (Compressed Air Foam System): 0.1% – 3%
  • Conventional Foam Nozzles: 0.1% – 3%

Physical Properties

  • Proportioning Ratio: 1%-6%
  • Specific Gravity: 1.06g/cc
  • pH: 6.8-7.6
  • Viscosity: ~36cP at 20°C (non-Newtonian varies depending on shear rate)
  • Shipping Specifications: 5 gal. (19 Liters.) 55 gal. drums (208 Liters.) 275 gal. Tote (1041 Liters)
  • Storage Temperature: 40°F-100°F
  • Surface Tension: 32 dynes/cm

Storage: For long term use make sure GreenFire Wetting Agent is properly maintained in the approved container and stored within the recommended range, there is no shelf life.

Please Note* – If freezing occurs, thawing and subsequent stirring will make the product completely serviceable.

Typical Properties

  • Nominal Use concentration: 0.1-3%
  • Specific Gravity@77F (25C): 1.06g/cc
  • pH @77F (25C): 6.8-7.6
  • Density: 8.51 lbs./gal.
  • Viscosity @77F (25C): ~34cSt (non-Newtonian: varies depending on shear rate)
  • Shipping Specifications: 5 gal. (19 Liters.) 55 gal. drums (209 Liters.) 275 gal. Tote (1041 Liters)
  • Minimum use temperature: Maintain above freezing
  • Storage temperature: 40°F-100F (4.5°C – 38C)
  • Freezing point: 30°F (-1°C)
  • Appearance: Amber liquid

Recommended Applications

The 3% can be used with conventional foam equipment with fresh, sea or brackish water.

Self inducting foam nozzles and foam nozzles with In-line inductors are among the most common types of hardware for application.

In addition to its use in aspirating foam equipment, it can be dispensed effectively through non-aspirating equipment Including fog nozzles, water spray devices and standard sprinklers.

Is effective in sub surface injection systems for non-water-soluble hydrocarbons. Sub surface injection is safe and reliable for fixed protection of storage tanks.


GreenFire Wetting Agent does NOT have a positive spreading coefficient and is therefore NOT considered an AFFF type foam.

However, its ability to form a stable foam blanket covering a fuel surface allows it to be used effectively in many applications where AFFF foams have previously been the standard.

Positive fire suppression and vapor control.

Proportions Readily: Permits use in a wide range or proportioning equipment.

Solution Stability: Solutions of GreenFire Wetting Agent do not present “transit time” limitations through handlines or in fixed systems.

Additional information

Available Sizes

5 Gallon Tote, 55 Gallon Drum, 275 Gallon Tote


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

INSP Group

We welcome you to contact us for more information
about any of our products or services.